DB25 Daughter Cards

7I77U Analog servo interface plus I/O daughtercard - Universal output version

The 7I77U is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 6I25, 7I92TM or 7I96. The 7I77U is designed for interfacing up to 6 Axis of analog servo motor drives and also provides 48 isolated I/O points for general purpose field I/O use. Six +-10V analog outputs and s

281,32 €

7I76U STEP/IO Step&dir plus I/O daughtercard - Universal output version

The 7I76U is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25T,6I25 and 7I92T. The 7I76U is designed for interfacing up to 5 Axis of step & dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and

146,18 €

7I88 16 channel differential output card

The 7I88 is a 16 channel differential driver that can provide up to 8 differential Step/Dir or 8 PWM/Dir output channels. The last channel pair can be be used as a RS-422/RS-485 interface if desired. All differential outputs have a full 5V swing and can be used single ended if required. 5V and GND c

97,04 €

7I89 8 Channel encoder 1 channel Serial RS-422/RS-485 interface

The 7I89 is a eight channel encoder plus single channel RS-422/RS-485 interface for Mesa's 25 pin Anything I/O series of FPGA interface cards. The 7I89 is designed for motion control applications. Encoder inputs can be TTL or differential on a per input basis. The 7I89 can also supply 5V power to en

109,32 €

7I77ISOL galvanic isolator

The 7I77ISOL is galvanic isolation card that electrically isolates and rebuffers signals from the FPGA controller card. The 7I77ISOL is useful in cases where sev ere electrical noise or ground loop problems exist or where longer cable runs are used between the FPGA card and the 7I77.

84,76 €

7I85S 4 Channel encoder, 8 differential output 1 channel Serial RS-422 interface

The 7I85S is a four channel encoder plus 8 differential output plus one channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I85S is designed for motion control applications. The 7I85S has four TTL or differential encoder inputs including index, eight differential ou

84,76 €

7I85 4 Channel encoder 5 channel Serial RS-422 interface

The 7I85 is a five channel RS-422 serial plus four channel encoder interface for Mesa's Anything I/O series of FPGA interface cards. The 7I85 is designed for motion control applications. A common usage of the 7I85 would be connecting up to four serially interfaced drives to four of the 7I85's five f

84,76 €

7I78 Step & dir daughtercard

The 7I78 daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25. The 7I78 is designed for interfacing up to 4 Axis of step & dir step motor or servo motor drives and also provides a spindle encoder interface, and an isolated analog spindle control. All step and direction

84,76 €

7I77 Analog servo interface plus I/O daughtercard - Sourcing output version (See replacement 7I77U)

The 7I77 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25. The 7I77 is designed for interfacing up to 6 Axis of analog servo motor drives and also provides 48 isolated I/O points for general purpose field I/O use. Six +-10V analog outputs and six encoder inputs

281,32 €

7I75 Breakout/FPGA protection card

The 7I75 is a breakout card for Mesa's 25 pin I/O FPGA cards. In addition to providing a breakout function, the 7I75 protects the FPGA card from excessive input voltages and ESD. The 7I75 protects FPGA I/O from accidental contact from external voltages of +12 and -5V with built in diode clamps and 5

55,28 €

7I74 Eight Channel RS-422/485 interface/ RJ45 Breakout

The 7I74 is a 8 channel RS-422 interface for Mesa's 25 pin I/O FPGA cards. The 7I74 has 8 independent receive and transmit channels. One transmit channel has a independent drive enable for bus or 2 wire half duplex systems. Serial I/O connectors are RJ45 jacks allowing standard CAT5 cables to be use

84,76 €