Anything I/O Daughter Cards

7I34-485 Eight Channel RS-422/RS-485 interface

The 7I34 is a 8 channel RS-422/RS-485 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34 has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header t

121,62 €

7I37F Isolated I/O card

The 7I37 F is an 8 output, 16 input isolated I/O card. The 7I37TA provides 8 Isolated 48VDC 1A output drivers. All output drivers are low saturation voltage MOSFETS for low power dissipation. Each of the 8 output switches is isolated from the others, allowing high side, low side, push-pull and other

97,04 €

7I76EU STEP/IO Step & dir plus I/O card - universal output version

The 7I76EU is a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step/dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

269,02 €

7I97T Ethernet interfaced Analog servo plus I/O

The 7I97T is a Ethernet connected motion control interface designed for interfacing up to 6 Axis of analog servo motor drives and includes encoder feedback for each axis. The 7I97 has 6 +-10V analog outputs and 6 drive enable outputs. The 7I97T also has 16 isolated inputs plus 6 isolated outputs for

342,72 €

7I37TA RevD 8 output, 16 input isolated I/O card

The 7I37 TA RevD is an 8 output, 16 input isolated I/O card. The 7I37TA RevD provides 8 Isolated 48VDC 2A output drivers. All output drivers are low saturation voltage MOSFETS for low power dissipation. Each of the 8 output switches is isolated from the others, allowing high side, low side, push-pul

109,32 €

7I95T Ethernet interfaced Step/dir +encoder + I/O

The 7I95T is a Ethernet connected motion control interface designed for controlling up to 6 Axis of step&dir step motor or servo motor drives and includes encoder feedback for each axis. The 7I95T replaces the 7I95 and offers better Ethernet ESD resistance, better Input RFI rejection and a larger FP

305,88 €

7I96S STEP/IO Step & dir plus I/O with analog spindle card

The 7I96S is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96S also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interf

183,02 €

7I34 Eight Channel RS-422 interface

The 7I34 is a 8 channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34 has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header that mat

72,48 €

7I36 Quad Analog servo interface

The 7I36 is a 4 axis analog servo interfaces intended for operation with MESA's Anything I/O cards when used for motion control applications. The 7I36 takes offset PWM signals from the Anything I/O card and converts them to +- 10V analog output voltages for direct connection to analog input servo am

183,02 €

7C80 RPI interfaced Step&dir plus I/O interface

The MESA 7C80 is motion oriented FPGA motherboard host for a Raspberry Pi CPU. The 7C80 connects to the GPIO interface and uses SPI for FPGA communication . The 7C80 provides 5V power for the RPI via a built in switching regulator. The 7C80 has 6 channels of differential Step/dir outputs with step r

305,88 €

7I97 Ethernet interfaced Analog servo plus I/O ( See replacement 7I97T)

The 7I97 is a Ethernet connected motion control interface designed for interfacing up to 6 Axis of analog servo motor drives and includes encoder feedback for each axis. The 7I97 has 6 +-10V analog outputs and 6 drive enable outputs. The 7I97 also has 16 isolated inputs plus 6 isolated outputs for g

342,72 €

7I95 Ethernet interfaced Step/dir +encoder + I/O (See replacement 7I95T)

The 7I95 is a Ethernet connected motion control interface designed for controlling up to 6 Axis of step&dir step motor or servo motor drives and includes encoder feedback for each axis. Step rates up to 10 MHz are supported. The 7I95 also has 24 isolated inputs plus 6 isolated outputs for general pu

305,88 €

7C81 RPI FPGA board

The MESA 7C81 is FPGA motherboard host for a Raspberry Pi CPU. The 7C81 connects to the RPI's GPIO interface and uses SPI for FPGA communication. Three 26 pin header connectors with s tandard parallel port pinouts and 5V tolerant I/O are provided for compatibility with most parallel port interfaced

109,32 €

7I76ED STEP/IO Step & dir plus I/O daughtercard - sinking output version (Obsolete, see replacement 7I76EU

The 7I76ED ia a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step &dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

244,45 €

7I49HV 6 channel resolver interface

The 7I49HV is a 6 channel resolver interface with 6 additional +-10V analog outputs. The 7I49 is intended for applications that read standalone resolvers, as the 7I49 generates the resolver reference excitation. The 7I49HV can be used with 1:1 and 1:2 transformation ratio resolvers. The 7I49HV has a

226,03 €

7I34-LVDS Eight Channel LVDS interface

The 7I34-LVDS is a 8 channel LVDS interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34-LVDS has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header

72,48 €

7I96 STEP/IO Step & dir plus I/O card

The 7I96 is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96 also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interfac

146,18 €

7I76E STEP/IO Step & dir plus I/O daughtercard - sourcing output version (See replacement 7I76EU)

The 7I76E ia a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step &dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

269,02 €

7I50 SPI I/O expander

The 7I50 is a 24 I/O SPI expander for use with MESAs Anything I/O cards. The 7I50 has 24 bidirectional logic level I/O pins and connects to a SPI interface. The 7I50 can use a TTL level SPI interface or differential SPI. One Anything I/O connector can drive six 7I50s for a total of 144 I/O points pe

55,28 €

7I65 Octal Analog servo interface

The 7I65 is a eight axis analog servo interface intended for operation with MESA's Anything I/O cards in motion control applications. The 7I65 has eight 16 bit DAC channels and eight TTL or differential encoder inputs. In addition the 7I65 has eight 12 bit + sign A-D inputs, eight isolated motor ena

342,72 €

7I53 12 Channel encoder 2 channel Serial RS-422 interface

The 7I53 is a twelve channel encoder interface plus two channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I53 is designed for motion control and measurement applications. One of the 7I53's serial links support RS-485 operation. Encoder inputs can be TTL or differe

121,62 €