Ir al contenido

Show All Adaptors & Cables

THCAD-RES
Set of 3x 1M Ohm 0.4W 0.1% Resistors for THCAD range extension and direct connection to plasma voltage. Full scale ranges with THCAD-10 or THCAD2 at 10V range: 1 = 110V FS 2 in series = 210V FS 3 in series = 310V FS One set (3 resistors) needed for range extension of one THCAD
2,46 €
DB25F-IDC26 CABLE 12" LP
12 Inch DB25F to IDC26 flat cable with low profile bracket Provides external access to P2 on 5I25 and 6I25 cards.
6,14 €
SPINx1A PWM One channel isolated digital
The SPINx1A is a one channel isolated digital potentiometer intended for spindle control. The SPINx1A takes three TTL level signals,PWM, DIR and ENA and has four isolated outputs: CW, CCW, ENA and VOUT. VOUT is a Analog voltage proportional to the PWM input signal and the Analog reference voltage (5
29,47 €
DB25M-DB25M CABLE 18"
DB25M to DB25M flat cable 18 inch Expansion connector cable for 5I25, 6I25,7I76E,7I9TF,7I92,7I80DB FPGA card DB25M to Mesa daughtercards with DB25F connector
14,74 €
DIN Tray 107MM X 204MM
DIN Tray 107MM X 204MM For 7C80, 7IA0, 7M80, 7EC1
18,42 €
DIN Tray 107MM X 102MM
DIN Tray 107MM X 102MM For 7C81, 7I94, 7I94T
9,22 €
IDC40-IDC40 1.5"
1.5" RPI GPIO cable for 7C80 and 7C81
9,83 €
3X20 MB CONNECTOR
Motherboard connector for 3X20 (2 required per 3X20) JAE WB3F200VD1T
8,59 €
AIO CABLE-5FT
50 conductor flat cable for Anything I/O cards. 5 foot length
23,34 €
AIO CABLE-4FT
50 conductor flat cable for Anything I/O cards. 4 foot length
22,10 €
AIO CABLE-2FT
50 conductor flat cable for Anything I/O cards. 2 foot length
19,66 €
AIO CABLE-3FT
50 conductor flat cable for Anything I/O cards. 3 foot length
20,88 €
AIO CABLE-1FT
50 conductor flat cable for Anything I/O cards. 1 foot length
18,42 €
DB25M-IDC26 CABLE 18"
DB25M to IDC26 flat cable 18 inch Expansion connector cable for 5I25, 5I25T, 6I25,7I76E,7I76EU,7I92TF,7I92TM,7I92TH,7I95,7I95T,7I96,7I96S,7I97,7I97T,7I98,7C80,7C81 FPGA card 26 pin Header to Mesa daughtercards or parallel port breakouts with DB25F connector
12,28 €
CFADPTCS-3.3 Compact Flash - IDE adapter type 2 - Chant Sincere
The CFADPTCS adapters allow use of Compact flash memory cards with any CPU with a 44 pin 2mm or 40 pin .1" IDE connector. The adapters have an activity light and a push button ejector, making it suitable for panel mounting. The CFADPT adapters can be jumpered for master or slave and can get the CF p
28,25 €
PTB4
Phoenix compatible 3.5 mm 4 position screw terminal block, side entry.
1,22 €
CAT5E-1FT
CAT5E cable for SSERIAL/Ethernet 1 foot RJ45 both ends for 7I44/7I74 / Ethernet
2,46 €
104-AT PC/104 to ISA adapter
The 104-AT is a simple PC/104 to ISA adapter to allow using a PC/104 card in a ISA backplane for development purposes.
49,14 €
JAEWB3F200VD1T
PCI Express, Board to Board Connector, Receptacle, 200 contact, .5mm receptacle verticle, Straight SMT for the 6I68 or 7I68.
8,59 €