Skip to Content
  1. Products ...
  2. Mesa Electronics
  3. Show All LinuxCNC Supported Boards
  4. Anything I/O Daughter Cards

Anything I/O Daughter Cards

Sort By Sort By: Featured
[7I52] 7I52 6 Channel encoder 6 channel Serial RS-422 interface
7I52 6 Channel encoder 6 channel Serial RS-422 interface
The 7I52 is a six channel RS-422 serial plus six channel encoder interface for Mesa's Anything I/O series of FPGA interface cards. The 7I52 is designed for motion control applications. A common usage of the 7I52 would be connecting up to six serially interfaced drives to the 7I52's six full duplex R
84.76 €
[7I49] 7I49 6 channel resolver interface
7I49 6 channel resolver interface
The 7I49 is a 6 channel resolver interface with 6 additional +-10V analog outputs. The 7I49 is intended for applications that read standalone resolvers, as the 7I49 generates the resolver reference excitation. The 7I49 can be used with 1:1 and 2:1 transformation ratio resolvers. The 7I49 has approxi
226.03 €
[7I48] 7I48 6 channel Analog servo interface
7I48 6 channel Analog servo interface
The 7I48 is a 6 axis analog servo interface intended for operation with MESA's Anything I/O cards in motion control applications. The 7I48 takes complementary PWM signals from the Anythng I/O card and converts them to +- 10V analog output voltages for direct connection to analog input servo amplifie
121.62 €
[7I47S] 7I47S 8/12 Channel motion oriented RS-422 interface with analog out
7I47S 8/12 Channel motion oriented RS-422 interface with analog out
The 7I47S is a 12 input, 8 output RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I47S is designed for motion control applications, both for buffering FPGA outputs and for conditioning RS-422 inputs. In addition the 7I47S has an isolated potentiometer type analog output
97.04 €
[7I47] 7I47 12 Channel motion oriented RS-422 interface
7I47 12 Channel motion oriented RS-422 interface
The 7I47 is a 12 channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I47 is designed for motion control applications, both for buffering FPGA outputs and for conditioning RS-422 inputs. A common usage of the 7I47 would be connecting up to 6 step+direction step drive
84.76 €
[7I46] 7I46 six Channel SPI breakout card
7I46 six Channel SPI breakout card
The 7I46 is a six channel SPI breakout. It connects the 50 pin Anything I/O cable to six 10 conductor SPI cables. The 7I46 also supplies 5V power to remote SPI devices via the 10 conductor cables. Total power is limited to 3A. A built-in high side power switch disconnects SPI power when cable power
43.00 €
[7I44] 7I44 Eight Channel RS-422/485 interface/ RJ45 Breakout
7I44 Eight Channel RS-422/485 interface/ RJ45 Breakout
The 7I44 is a 8 channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I44 has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. Serial I/O connectors are RJ45 jacks allowing standar
84.76 €
[7I42TA] 7I42TA Breakout/FPGA protection card
7I42TA Breakout/FPGA protection card
The 7I42TA is a breakout card for Mesa's 50 pin I/O FPGA cards. It has 50 pin .1" output connector and 3.5mm headers compatible with pluggable screw terminal blocks. In addition to providing a breakout function, the 7I42TA protects the FPGA card from excessive input voltages and ESD. The 7I42TA prot
55.28 €
[7I37-COM] 7I37-COM Isolated I/O card
7I37-COM Isolated I/O card
The 7I37-COM is a version of the 7I37 with a common input reference and a common output power source. The 7I37-COM can simplify I/O wiring when individually isolated inputs and outputs are not required. The 7I37COM has 16 isolated inputs and 8 isolated outputs like the standard 7I37 but the inputs s
97.04 €
[7I33] 7I33 Quad Analog servo interface (Obsolete, closest replacement is the 7I36)
7I33 Quad Analog servo interface (Obsolete, closest replacement is the 7I36)
The 7I33 is a 4 axis analog servo interfaces intended for operation with Mesa's Anything I/O cards in motion control applications. The 7I33 takes the PWM and direction signals from the Anythng I/O card and converts them to +- 10V analog output voltages for direct connection to analog input servo amp
84.76 €
[7I33TA] 7I33TA Quad Analog servo interface (Obsolete closest replacement is the 7I36)
7I33TA Quad Analog servo interface (Obsolete closest replacement is the 7I36)
The 7I33TA is a 4 axis analog servo interfaces intended for operation with Mesa's Anything I/O cards in motion control applications. The 7I33 takes the PWM and direction signals from the Anythng I/O card and converts them to +- 10V analog output voltages for direct connection to analog input servo a
97.04 €