Skip to Content
  1. Products ...
  2. Mesa Electronics
  3. Show All LinuxCNC Supported Boards
  4. Miscellaneous Daughter Cards

Miscellaneous Daughter Cards

Sort By Sort By: Featured
[7I34-485] 7I34-485 Eight Channel RS-422/RS-485 interface
7I34-485 Eight Channel RS-422/RS-485 interface
The 7I34 is a 8 channel RS-422/RS-485 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34 has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header t
121.62 €
[7I34] 7I34 Eight Channel RS-422 interface
7I34 Eight Channel RS-422 interface
The 7I34 is a 8 channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34 has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header that mat
72.48 €
[THCAD2] THCAD2 High isolation A-D accessory
THCAD2 High isolation A-D accessory
The THCAD2 is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD2 has 2 settable input ranges, 5V full scale and 10V full scale to accommodate different plasma source dividers. When used for direct plasma
97.04 €
[THCAD-5] THCAD-5 High isolation A-D accessory (See replacement THCAD2)
THCAD-5 High isolation A-D accessory (See replacement THCAD2)
The THCAD is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD is available in three voltage ranges, 0-5V, 0-10V and 0-300V. When used for plasma voltage monitoring, the 5V and 10V versions require an ex
84.76 €
[7I34-LVDS] 7I34-LVDS Eight Channel LVDS interface
7I34-LVDS Eight Channel LVDS interface
The 7I34-LVDS is a 8 channel LVDS interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34-LVDS has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header
72.48 €
[THCAD-300] THCAD-300 High isolation A-D accessory (See replacement THCAD2)
THCAD-300 High isolation A-D accessory (See replacement THCAD2)
The THCAD is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD is available in three voltage ranges, 0-5V, 0-10V and 0-300V. When used for plasma voltage monitoring, the 5V and 10V versions require an ex
84.76 €
[THCAD-10] THCAD-10 High isolation A-D accessory (See replacement THCAD2)
THCAD-10 High isolation A-D accessory (See replacement THCAD2)
The THCAD is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD is available in three voltage ranges, 0-5V, 0-10V and 0-300V. When used for plasma voltage monitoring, the 5V and 10V versions require an ex
84.76 €