Show All Anything I/O Cards

7I76ED STEP/IO Step & dir plus I/O daughtercard - sinking output version (Obsolete, see replacement 7I76EU

The 7I76ED ia a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step &dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

244.45 €

DB25M-IDC26 CABLE 18"

DB25M to IDC26 flat cable 18 inch Expansion connector cable for 5I25, 5I25T, 6I25,7I76E,7I76EU,7I92TF,7I92TM,7I92TH,7I95,7I95T,7I96,7I96S,7I97,7I97T,7I98,7C80,7C81 FPGA card 26 pin Header to Mesa daughtercards or parallel port breakouts with DB25F connector

12.28 €

7I49HV 6 channel resolver interface

The 7I49HV is a 6 channel resolver interface with 6 additional +-10V analog outputs. The 7I49 is intended for applications that read standalone resolvers, as the 7I49 generates the resolver reference excitation. The 7I49HV can be used with 1:1 and 1:2 transformation ratio resolvers. The 7I49HV has a

226.03 €

7I34-LVDS Eight Channel LVDS interface

The 7I34-LVDS is a 8 channel LVDS interface for Mesa's Anything I/O series of FPGA interface cards. The 7I34-LVDS has 8 independent receive and transmit channels. Each transmit channel has a independent drive enable for bus or 2 wire half duplex systems. The controller connection is a 50 pin header

72.48 €

7I96 STEP/IO Step & dir plus I/O card

The 7I96 is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96 also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interfac

146.18 €

6I24-16 FPGA based PCI Anything I/O card

The MESA 6I24 is a low cost, general purpose, Xilinx XC6SLX16-2FTG256C FPGA based progr ammable I/O card for the PCIE bus. The 6I24 is a low profile one lane PCIE card (available with low profile and standard brackets, low profile b r acket shown here) Firmware modules are provided for hardware step

170.75 €

6I24-25 FPGA based PCI Anything I/O card

The MESA 6I24-25 is a low cost, general purpose, Xilinx XC6SLX25-2FTG256C FPGA based progr ammable I/O card for the PCIE bus. The 6I24 is a low profile one lane PCIE card (available with low profile and standard brackets, low profile b r acket shown here) Firmware modules are provided for hardware s

195.31 €

5I24-25 FPGA based PCI Anything I/O card

The MESA 5I24 is a low cost, general purpose, FPGA based progr ammable I/O card for the PCI bus. The 5I24 is a low profile PCI card (available with low profile and standard brackets, standard profile b r acket shown here) Dual FPGA configuration EEPROMs allow simple recovery from programming mistake

170.75 €

5I24-16 FPGA based PCI Anything I/O card

The MESA 5I24 is a low cost, general purpose, FPGA based progr ammable I/O card for the PCI bus. The 5I24 is a low profile PCI card (available with low profile and standard brackets, standard profile b r acket shown here) Dual FPGA configuration EEPROMs allow simple recovery from programming mistake

146.18 €

7I85-6I25 PLUG-N-GO KIT

7I85-6I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT)

218.66 €

7I85-5I25 PLUG-N-GO KIT

7I85-5I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT) OBSOLETE: See 7I85T-5I25 PLUG-N-GO KIT

194.09 €

7I85S-6I25 PLUG-N-GO KIT

7I85S-6I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT)

218.66 €

7I90HD Parallel/SPI Anything I/O card

The MESA 7I90HD is a very low cost, general purpose, FPGA based progr ammable I/O card with a EPP parallel, RS-422 serial or SPI host interface. Dual FPGA configuration EEPROMs allow simple recovery from programming mistakes. Firmware modules are provided for hardware step generation, quadrature enc

72.48 €

7I76E STEP/IO Step & dir plus I/O daughtercard - sourcing output version (See replacement 7I76EU)

The 7I76E ia a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step &dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

269.02 €

7I77ISOL galvanic isolator

The 7I77ISOL is galvanic isolation card that electrically isolates and rebuffers signals from the FPGA controller card. The 7I77ISOL is useful in cases where sev ere electrical noise or ground loop problems exist or where longer cable runs are used between the FPGA card and the 7I77.

84.76 €

HD-DB ADAPT

The HD-DB is an adapter that allows the use of 25 pin daughterc ards with 50 pin FPGA cards. For example the HD-DB will allow the use of a 7I77 with a 5I20, 5I22, or 5I23 etc FPGA card. The 7 unused FPGA I/O pins are brought out to a terminal block for easy access.

24.56 €

7I85S-5I25 PLUG-N-GO KIT

7I85S-5I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT) OBSOLETE: See 7I85S-5I25T PLUG-N-GO KIT

194.09 €

DB25M-DB25M 10FT

DB25Mto DB25M IEEE 1284 compliant parallel port cable 10' length.

24.56 €

DB25M-DB25M 6FT

DB25Mto DB25M IEEE 1284 compliant parallel port cable 6' length.

18.42 €

DB25F-IDC26 CABLE 12" SP

12 Inch DB25F to IDC26 flat cable with standard profile bracket Provides external access to P2 on 5I25 and 6I25 cards. Allows FPGA cards with 26 pin headers to connect to parallel port breakout boards with DB25M connectors.

6.14 €

7I50 SPI I/O expander

The 7I50 is a 24 I/O SPI expander for use with MESAs Anything I/O cards. The 7I50 has 24 bidirectional logic level I/O pins and connects to a SPI interface. The 7I50 can use a TTL level SPI interface or differential SPI. One Anything I/O connector can drive six 7I50s for a total of 144 I/O points pe

55.28 €