Anything I/O FPGA Cards

3X20-1 External PCIE Anything I/O daughtercard --BAD--

The MESA 3X20 is a high I/O density external PCIE FPGA card. The 3X20 has 144 user I/O available on a tiny 2.5" x 3.25" card. The 3X20 connects to the host via a standard 1 lane PCIE cable or through its motherboard connector. All core and I/O power is regulated on card so only single external 3.3V

24,56 €

7I76EU STEP/IO Step & dir plus I/O card - universal output version

The 7I76EU is a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step/dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

269,02 €

7I97T Ethernet interfaced Analog servo plus I/O

The 7I97T is a Ethernet connected motion control interface designed for interfacing up to 6 Axis of analog servo motor drives and includes encoder feedback for each axis. The 7I97 has 6 +-10V analog outputs and 6 drive enable outputs. The 7I97T also has 16 isolated inputs plus 6 isolated outputs for

342,72 €

7I94T Anything I/O Ethernet card

The 7I94T is a Ethernet connected motion control interface designed for interfacing up to eight high speed RS-422 or RS-485 serial devices including Mesa sserial remote interfaces, absolute encoders and MODBUS devices. In addition, a FPGA expansion connector compatible with Mesa's 25 pin daughtercar

146,18 €

5I25T Superport FPGA based PCI Anything I/O card (requires LinuxCNC 2.9.2 or greater)

The MESA 5I25T is a low cost, general purpose, FPGA based programmable I/O card for the PCI bus. The 5I25T is a low profile PCI card (available with low profile and standard brackets, low profile bracket shown here) that uses standard parallel port pinouts and connectors for compatibilty with most p

109,32 €

7I80HDT Ethernet Anything I/O card

The MESA 7I80HDT is a low cost, general purpose, FPGA based progr ammable I/O card with 100 BaseT Ethernet host connection. The 7I80HDT has a simplified UDP host data transfer system that allows operation in real time if required and compability with standard networks for non-real time applications.

183,02 €

7I95T Ethernet interfaced Step/dir +encoder + I/O

The 7I95T is a Ethernet connected motion control interface designed for controlling up to 6 Axis of step&dir step motor or servo motor drives and includes encoder feedback for each axis. The 7I95T replaces the 7I95 and offers better Ethernet ESD resistance, better Input RFI rejection and a larger FP

305,88 €

7I92TH Anything I/O Ethernet card 2x 26 pin header

The MESA 7I92TH is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection. The 7I92T series replaces the 7I92 series cards. Enhanced features include a larger FPGA, better Ethernet ESD protection, and a pullup/pull down option for the I/O pins. The 7I92

133,90 €

7I92TF Anything I/O Ethernet card 1x DB25 Female, 1x 26 pin header

The MESA 7I92TF is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection. The 7I92T series replaces the 7I92 series cards. Enhanced features include a larger FPGA, better Ethernet ESD protection, and a pullup/pull down option for the I/O pins. The 7I92

133,90 €

7I92TM Anything I/O Ethernet card 1x DB25 Male, 1x 26 pin header

The MESA 7I92TM is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection. The 7I92T series replaces the 7I92 series cards. Enhanced features include a larger FPGA, better Ethernet ESD protection, and a pullup/pull down option for the I/O pins. The 7I92

133,90 €

7I96S STEP/IO Step & dir plus I/O with analog spindle card

The 7I96S is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96S also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interf

183,02 €

7I68-FON 3X2X cabled PCIE motherboard

The MESA 7I68 is a simple motherboard for 3X2X series FPGA daughtercards. The 7I68 provides a base and simplified I/O connections for the 3X2X series daughtercards. The 7I68 can be used for evaluation of 3X2X series cards or for final application. The 7I68 buffers all I/O pins with quickwitches for

121,62 €

7C80 RPI interfaced Step&dir plus I/O interface

The MESA 7C80 is motion oriented FPGA motherboard host for a Raspberry Pi CPU. The 7C80 connects to the GPIO interface and uses SPI for FPGA communication . The 7C80 provides 5V power for the RPI via a built in switching regulator. The 7C80 has 6 channels of differential Step/dir outputs with step r

305,88 €

7I97 Ethernet interfaced Analog servo plus I/O ( See replacement 7I97T)

The 7I97 is a Ethernet connected motion control interface designed for interfacing up to 6 Axis of analog servo motor drives and includes encoder feedback for each axis. The 7I97 has 6 +-10V analog outputs and 6 drive enable outputs. The 7I97 also has 16 isolated inputs plus 6 isolated outputs for g

342,72 €

7I95 Ethernet interfaced Step/dir +encoder + I/O (See replacement 7I95T)

The 7I95 is a Ethernet connected motion control interface designed for controlling up to 6 Axis of step&dir step motor or servo motor drives and includes encoder feedback for each axis. Step rates up to 10 MHz are supported. The 7I95 also has 24 isolated inputs plus 6 isolated outputs for general pu

305,88 €

7I93 Anything I/O Ethernet card

The MESA 7I93 is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection. The 7I93 has a simplified UDP host data transfer system that allows operation in real time if required and compatibility with standard networks for non-real time applications. Firm

109,32 €

7I98 Anything I/O Ethernet card 3x 26 pin header

The MESA 7I98 is a low cost, general purpose, FPGA based programmable I/O card intended for motion control appications and with a 100 BaseT Ethernet host connection. The 7I98 that uses standard parallel port pinouts and connectors for compatibility with most parallel port interfaced motion control /

121,62 €

7C81 RPI FPGA board

The MESA 7C81 is FPGA motherboard host for a Raspberry Pi CPU. The 7C81 connects to the RPI's GPIO interface and uses SPI for FPGA communication. Three 26 pin header connectors with s tandard parallel port pinouts and 5V tolerant I/O are provided for compatibility with most parallel port interfaced

109,32 €

7I94 Anything I/O Ethernet card (Go to replacement: 7I94T)

The 7I94 is a Ethernet connected motion control interface designed for interfacing up to eight high speed RS-422 or RS-485 serial devices including Mesa sserial remote interfaces, absolute encoders and general serial interfacing. In addition, a FPGA expansion connector compatible with Mesa's 25 pin

146,18 €

7I76ED STEP/IO Step & dir plus I/O daughtercard - sinking output version (Obsolete, see replacement 7I76EU

The 7I76ED ia a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step &dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use. All step and

244,45 €

6I24-16 FPGA based PCI Anything I/O card

The MESA 6I24 is a low cost, general purpose, Xilinx XC6SLX16-2FTG256C FPGA based progr ammable I/O card for the PCIE bus. The 6I24 is a low profile one lane PCIE card (available with low profile and standard brackets, low profile b r acket shown here) Firmware modules are provided for hardware step

170,75 €