Mesa Electronics

The 4A24 is a high resolution, high speed, low cost A-D card for the PC/104 bus. 200 Khz and 500 KHz models are available. On card EEPROM calibration storage and fully digital zero and span calibration eliminates potentiometers and simplifies circuitry. A high bandwidth instrumentation amplifier is

The 4A23 is a high resolution, low power, delta-sigma, A-D card for the PC/104 bus. 8 differential or 16 single ended inputs are provided. The inputs have 500V isolation from system ground for noise elimination and to permit floating measurements. The 4A23 has 5 programmable input ranges: 25 mV, 50

The 4I71 is a stackable PC/104-plus card that combines a 100BaseT Ethernet MAC with a 8 port switch. The 4I71 makes it easy to connect multiple embedded system cards without the awkward power or mechanical problems with consumer type Ethernet switches. The 8 Ethernet ports support autonegotiation al

The 4I71 is a stackable PC/104-plus card that combines a 100BaseT Ethernet MAC with a 8 port switch. The 4I71 makes it easy to connect multiple embedded system cards without the awkward power or mechanical problems with consumer type Ethernet switches. The 8 Ethernet ports support autonegotiation al

The 4I71 is a stackable PC/104-plus card that combines a 100BaseT Ethernet MAC with a 8 port switch. The 4I71 makes it easy to connect multiple embedded system cards without the awkward power or mechanical problems with consumer type Ethernet switches. The 8 Ethernet ports support autonegotiation al

The 4I71 is a stackable PC/104-plus card that combines a 100BaseT Ethernet MAC with a 8 port switch. The 4I71 makes it easy to connect multiple embedded system cards without the awkward power or mechanical problems with consumer type Ethernet switches. The 8 Ethernet ports support autonegotiation al

The 4I66 is a stackable PC/104-plus card that combines a 100BaseT Ethernet MAC with a 4 port switch. The 4I66 makes it easy to connect multiple embedded system cards without the awkward power or mechanical problems with consumer type Ethernet switches. The 4 Ethernet ports support autonegotiation al

The 4I63 is a high performance, four channel asynchronous serial port on a stackable PC/104-PLUS PCI bus card. Since it is a PCI based serial card, it has lower transfer overhead than ISA PC/104 based cards and can support more channels at higher baud rates. The 4I63 is available in three versions:

The 4I63 is a high performance, four channel asynchronous serial port on a stackable PC/104-PLUS PCI bus card. Since it is a PCI based serial card, it has lower transfer overhead than ISA PC/104 based cards and can support more channels at higher baud rates. The 4I63 is available in three versions:

The 4I63 is a high performance, four channel asynchronous serial port on a stackable PC/104-PLUS PCI bus card. Since it is a PCI based serial card, it has lower transfer overhead than ISA PC/104 based cards and can support more channels at higher baud rates. The 4I63 is available in three versions:

The 4I61 is a low cost, high performance full duplex 10/100 BaseT Ethernet card in PC/104-plus format. The 4I61 uses the National Semiconductor DP83815 Ethernet chip with integrated PHY for minimum component count and reliability. The 4I61 is a universal card and can work in 5V and 3.3V systems. A R

The 4I32 is a high performance, four channel asynchronous serial port on a stackable PC/104 bus card. The 4I32 is available in three versions: quad RS-232, quad RS-422/485, and a model with two RS-232 and two RS-422/485 channels. The 4I32 is similar to the 4I23 but uses enhanced 16C550 compatible FI

The 4I32 is a high performance, four channel asynchronous serial port on a stackable PC/104 bus card. The 4I32 is available in three versions: quad RS-232, quad RS-422/485, and a model with two RS-232 and two RS-422/485 channels. The 4I32 is similar to the 4I23 but uses enhanced 16C550 compatible FI

The 4I32 is a high performance, four channel asynchronous serial port on a stackable PC/104 bus card. The 4I32 is available in three versions: quad RS-232, quad RS-422/485, and a model with two RS-232 and two RS-422/485 channels. The 4I32 is similar to the 4I23 but uses enhanced 16C550 compatible FI

The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels. The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and trans

The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels. The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and trans

The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels. The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and trans

The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels. The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and trans

The MESA ISIO is a low cost isolated I/O card that is driven from a standard printer port. The ISIO has 4 relay or 4 transistor outputs and 8 opto-isolated inputs. Relay outputs are rated at 2A, 24VDC or 1A, 120VAC. Transistor outputs are rated at 1A, 48VDC. Inputs are 10 to 48VDC. All isolated I/O

The MESA 4P20 is a 11W POE power supply for PC/104 and PC/104-PLUS systems. The 4P20 allows a remote PC/104 system to get power and high speed communication from a single CAT5 cable up to 100 Meters long. The 4P20 supplies 5V at up to 2A, +12V at up to 200 mA and -12 at up to 100 mA via the bus conn

The 5I71 is a PCI to one lane PCI Express bridge interface on a standard PCI card. The 5I71 uses the standard one lane PCIE cable and can be used in conjunction with the 4I73 in order to access PC/104-PLUS peripheral cards up to 15 Meters from a standard desktop PC. The 5I71 is also compatible with