Show All Anything I/O Cards

COMMX2 COMMON BLOCK

This common block is for convenient removable screw terminal plug commoning of power and ground connections. The common block uses standard spacing that matches most other Mesa daughter cards. 24 terminals are provided with each common blocksplit into 2 groups of 12 commoned pins. 3.5 mm pluggable s

9,83 €

DIN RAIL ADAPTER KIT (3 PCS.)

DIN rail mounting hardware is ava ilable for all daughtercards with 3.7" hole spacing (this inc ludes almost all daughter cards except the 7I73). Hardware consists of a DIN rail clip and aluminum mounting bar plus M3 threaded spacers and screws. Sold in sets of 3.0. 1 set (3 pieces) is suggested for

14,74 €

DIN RAIL ADAPTER KIT (2 PCS.)

DIN rail mounting hardware is ava ilable for all daughtercards with 3.7" hole spacing (this inc ludes almost all daughter cards except the 7I73). Hardware consists of a plastic DIN rail clip and aluminum mounting bar plus M3 threaded spacers and screws. Sold in sets of 2. 1 set (2 pieces) is suggest

9,83 €

4I34M-2 FPGA based Anything I/O card (OBSOLETE)

The MESA 4I34 is a general purpose programmable I/O card for the PC/104 bus. The 4I34 uses a 100K or 200K gate Xilinx FPGA for all logic, so it is truly an Anything I/O card. The FPGA is downloadable from the PC/104 bus side, allowing creation of almost any kind of specialized I/O function, includin

278,86 €

4I34M-1 FPGA based Anything I/O card (OBSOLETE)

The MESA 4I34 is a general purpose programmable I/O card for the PC/104 bus. The 4I34 uses a 100K or 200K gate Xilinx FPGA for all logic, so it is truly an Anything I/O card. The FPGA is downloadable from the PC/104 bus side, allowing creation of almost any kind of specialized I/O function, includin

250,60 €

7I78-6I25 PLUG-N-GO KIT

7I78-6I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT)

218,66 €

7I77U-6I25 PLUG-N-GO KIT

7I77U-6I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT)

415,20 €

7I78-5I25 PLUG-N-GO KIT

7I78-5I25 PLUG-N-GO KIT - (FOR DIN RAIL MOUNTING, ADD DIN RAIL ADAPTER KIT)

194,09 €

7I66-24 Isolated remote power driver card

The 7I66-24 is a 24 channel remote isolated digital output card. All output pins have LED status indicators. Outputs are sourcing type drivers capable of driving 2.5 A loads. The field output points are galvanically isolated from the communications link. The 7I66-24 uses field power of 8VDC to 32VDC

146,18 €

THCAD-300 High isolation A-D accessory (See replacement THCAD2)

The THCAD is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD is available in three voltage ranges, 0-5V, 0-10V and 0-300V. When used for plasma voltage monitoring, the 5V and 10V versions require an ex

84,76 €

THCAD-10 High isolation A-D accessory (See replacement THCAD2)

The THCAD is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls. The THCAD is available in three voltage ranges, 0-5V, 0-10V and 0-300V. When used for plasma voltage monitoring, the 5V and 10V versions require an ex

84,76 €

7I87 Remote isolated Analog input card

The 7I87 is remote isolated eight channel +-10V analog input card. All channels have 12 bit resolution and selectable averaging. All inputs are galvanically isolated from the communication and remote power. A buffered A-D reference voltage is provided for ratiometric applications. All inputs have 10

121,62 €

7I85S 4 Channel encoder, 8 differential output 1 channel Serial RS-422 interface

The 7I85S is a four channel encoder plus 8 differential output plus one channel RS-422 interface for Mesa's Anything I/O series of FPGA interface cards. The 7I85S is designed for motion control applications. The 7I85S has four TTL or differential encoder inputs including index, eight differential ou

84,76 €

7I85 4 Channel encoder 5 channel Serial RS-422 interface

The 7I85 is a five channel RS-422 serial plus four channel encoder interface for Mesa's Anything I/O series of FPGA interface cards. The 7I85 is designed for motion control applications. A common usage of the 7I85 would be connecting up to four serially interfaced drives to four of the 7I85's five f

84,76 €

7I84 Isolated remote field I/O card - Sourcing outputs. (Obsolete see replacement 7I84U)

The 7I84 is a remote isolated 32 input and 16 output digital I/O card. The 7I84 is identical to the 7I84D except that it has sourcing type outputs (PNP). The 16 outputs are 5VDC to 28VDC sourcing drivers with 300 mA maximum current capability. Outputs have per output short circuit protection, overvo

97,04 €

7I83 Analog output/ analog servo interface

The 7I83 is remote isolated six channel +-10V analog output card intended for analog drive interfacing or other +-10V analog output applications. The analog outputs, drive enables and field power are galvanically isolated from the communications link. Analog outputs have 13 bit resolution and a 2.5

146,18 €

7I78 Step & dir daughtercard

The 7I78 daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25. The 7I78 is designed for interfacing up to 4 Axis of step & dir step motor or servo motor drives and also provides a spindle encoder interface, and an isolated analog spindle control. All step and direction

84,76 €

7I77 Analog servo interface plus I/O daughtercard - Sourcing output version (See replacement 7I77U)

The 7I77 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25. The 7I77 is designed for interfacing up to 6 Axis of analog servo motor drives and also provides 48 isolated I/O points for general purpose field I/O use. Six +-10V analog outputs and six encoder inputs

281,32 €

7I75 Breakout/FPGA protection card

The 7I75 is a breakout card for Mesa's 25 pin I/O FPGA cards. In addition to providing a breakout function, the 7I75 protects the FPGA card from excessive input voltages and ESD. The 7I75 protects FPGA I/O from accidental contact from external voltages of +12 and -5V with built in diode clamps and 5

55,28 €

7I74 Eight Channel RS-422/485 interface/ RJ45 Breakout

The 7I74 is a 8 channel RS-422 interface for Mesa's 25 pin I/O FPGA cards. The 7I74 has 8 independent receive and transmit channels. One transmit channel has a independent drive enable for bus or 2 wire half duplex systems. Serial I/O connectors are RJ45 jacks allowing standard CAT5 cables to be use

84,76 €

7I73 Pendant/control panel interface

The 7I73 is a remote real time pendant or control panel interface. The 7I73 uses a high speed real time RS-422 link for host communications and can support update rates up to 10K updates per second so there is no detectable delay or roughness in the control panel or pendant interface. The 7I73 suppo

60,19 €