Show All Adaptors & Cables

DB25M-DB25M 10FT

DB25Mto DB25M IEEE 1284 compliant parallel port cable 10' length.

24,56 €

DB25M-DB25M 6FT

DB25Mto DB25M IEEE 1284 compliant parallel port cable 6' length.

18,42 €

PTB8V

Phoenix compatible 3.5 mm 8 position screw terminal block, top entry.

2,46 €

PTB2

Phoenix compatible 3.5 mm 2 position screw terminal block, side entry.

1,22 €

PTB6

Phoenix compatible 3.5 mm 6 position screw terminal block, side entry.

1,22 €

[DB25F-IDC26 CABLE 12" SP] DB25F-IDC26 CABLE 12" SP

12 Inch DB25F to IDC26 flat cable with standard profile bracket Provides external access to P2 on 5I25 and 6I25 cards. Allows FPGA cards with 26 pin headers to connect to parallel port breakout boards with DB25M connectors.

6,14 €

COMMX2 COMMON BLOCK

This common block is for convenient removable screw terminal plug commoning of power and ground connections. The common block uses standard spacing that matches most other Mesa daughter cards. 24 terminals are provided with each common blocksplit into 2 groups of 12 commoned pins. 3.5 mm pluggable s

9,83 €

DIN RAIL ADAPTER KIT (3 PCS.)

DIN rail mounting hardware is ava ilable for all daughtercards with 3.7" hole spacing (this inc ludes almost all daughter cards except the 7I73). Hardware consists of a DIN rail clip and aluminum mounting bar plus M3 threaded spacers and screws. Sold in sets of 3.0. 1 set (3 pieces) is suggested for

14,74 €

DIN RAIL ADAPTER KIT (2 PCS.)

DIN rail mounting hardware is ava ilable for all daughtercards with 3.7" hole spacing (this inc ludes almost all daughter cards except the 7I73). Hardware consists of a plastic DIN rail clip and aluminum mounting bar plus M3 threaded spacers and screws. Sold in sets of 2. 1 set (2 pieces) is suggest

9,83 €

CFADPTHD Dual Compact Flash to IDE adapter

The CFADPTHD adapter allow use of 2 Compact flash memory cards with any CPU with a 44 pin 2mm or 40 pin .1" IDE connector. The CFADPTHD has 2 CF sockets, one connected as master and one connected as slave. Master and slave can be swapped with a on card jumper. The adapter has an activity light and a

61,43 €

CFADPT10 Compact Flash to SATA adapter (OBSOLETE)

The CFADPT10 adapters allow use of Compact flash memory cards with any CPU SATA connector. The CFADPT10 is in a SATA 2.5" hard drive mechanical format including SATA type power connector. T he adapters have an activity light and a push button ejector, making it suitable for panel mounting. The adapt

61,43 €

CFADPT9 Compact Flash to SATA adapter

The CFADPT9 adapters allow use of Compact flash memory cards with any CPU SATA connector. The adapters have an activity light and a push button ejector, making it suitable for panel mounting. The adapter supports CF cards and Micro-Drives with interface standards up to UltraDMA 150. The on card auxi

43,00 €

CFADPT7-S 2.5" Hard drive format EDS compact flash to IDE adapter

The CFADPT7-S can be mounted where a 2.5" hard drive would fit as it has the same mounting holes and same physical size. The CFADPT7 is available as a standard single drive or optionally a dual drive with two CF sockets. The CFADPT7 supports newer CF cards that use DMA. The adapters have an activity

30,71 €

SPINx1 PWM (Go to replacement: SPINx1A PWM)

The SPINx1 is a one channel isolated digital potentiometer intended for spindle control. The SPINx1 takes three TTL level signals, PWM, DIR and ENA and has four isolated outputs: CW, CCW, ENA and VOUT. VOUT is a Analog voltage proportional to the PWM input signal and the Analog reference voltage (5

29,47 €

PCI-PC104-PLUS

Allows use of standard PCI cards with PC104-PLUS CPU.

92,12 €

4I72 QUAD PC/104-PLUS to MINI-PCI/WIRELESS ADAPTER

T he 4I72 is an adapter that allows use of 4 MINI-PCI type III cards (such as wireless network cards) on a PC/104-PCI host CPU. The 4I72 uses a PCI bridge so that the 4I72 only occupies a single PC/104-PCI slot. The bridge also allows the 4I72 to be used with 5V PCI bus devices since it isolates the

197,77 €

4I67-NFT DUAL PC/104-PLUS to MINI-PCI/WIRELESS ADAPTER

T he 4I67 is an adapter that allows use of 2 MINI-PCI type III cards (such as wireless network cards) on a PC/104-PLUS host CPU. The 4I67 uses a PCI bridge so that the 4I67 only occupies a single PC/104 slot. The bridge also allows the 4I67 to be used with 5V PCI bus devices since it isolates the MI

162,14 €

4I67 DUAL PC/104-PLUS to MINI-PCI/WIRELESS ADAPTER

T he 4I67 is an adapter that allows use of 2 MINI-PCI type III cards (such as wireless network cards) on a PC/104-PLUS host CPU. The 4I67 uses a PCI bridge so that the 4I67 only occupies a single PC/104 slot. The bridge also allows the 4I67 to be used with 5V PCI bus devices since it isolates the MI

170,75 €

4I64-NFT PC/104-PLUS to MINI PCI/WIRELESS ADAPTER

T he 4I64 is an adapter that allows use of MINI-PCI type III cards (such as wireless network cards) on a PC/104-PLUS host CPU. The 4I64 can be jumpered for slot 0,1,2 or 3 of the host PC/104PLUS bus. The 4I64 has a local 3.3V regulator for the MINI-PCI card. Local status LEDS are provided and a conn

83,53 €

4I64 PC/104-PLUS to MINI PCI/WIRELESS ADAPTER

T he 4I64 is an adapter that allows use of MINI-PCI type III cards (such as wireless network cards) on a PC/104-PLUS host CPU. The 4I64 can be jumpered for slot 0,1,2 or 3 of the host PC/104PLUS bus. The 4I64 has a local 3.3V regulator for the MINI-PCI card. Local status LEDS are provided and a conn

92,12 €

485x1 One channel RS-485/RS-422 adapter

The 485x1 is a single channel TTL to RS422 or RS485 adapter. It supports full duplex (4 wire) RS-422 interfaces or half duplex (2 wire) RS-485 type interfaces.

12,28 €